ESPHome-Devices

Wipro Next 20W CCT Batten

Wipro Next 20W CCT Batten

Device Type: light
Electrical Standard: in

T5 Sized Tubelight with CCT & Dimming supports, limits being 2700K-6500K. Works natively with either Tuya/Smart Life/Wipro Smart Home. Based on TYWE3L.

Flashing process

Open the two grey tabs on the sides of the batten and carefully pull out the PCB and solder the wires according to the TYWE3L pinout.Serial flashing is identical to that of ESP-12. Make sure to use 3.3V logic levels for serial communication (USB adapters like CH340G, CP2102). Using ESPHome Flasher is advisable.

GPIO Pinout

PinFunction
GPIO05Brightness PWM pin
GPIO13Colour Temp PWM pin

PCB

Configuration

esphome:
name: "wipro-next-cct-batten"
esp8266:
board: esp01_1m
# Enable logging
logger:
# Enable Home Assistant API
api:
encryption:
key: !secret encryption_key
ota:
password: !secret ota_password
wifi:
ssid: !secret wifi_ssid
password: !secret wifi_password
# Enable fallback hotspot (captive portal) in case wifi connection fails
ap:
ssid: !secret fallback_ssid
password: !secret fallback_password
captive_portal:
output:
- platform: esp8266_pwm
id: brightness_pwm
pin: GPIO5
- platform: esp8266_pwm
id: color_temp_pwm
pin: GPIO13
inverted: true
light:
- platform: color_temperature
name: "wipro-next-cct-batten"
color_temperature: color_temp_pwm
brightness: brightness_pwm
cold_white_color_temperature: 6500 K
warm_white_color_temperature: 2700 K
Edit this page on GitHub