Link

Teckin SR46

  1. General Notes
  2. GPIO Pinout
  3. Basic Configuration

General Notes

This plug use tuya so you can use tuya-convert to flash ESPHome. The UART ports is connected to GPIO1 and GPIO3. The on/off switch is on datapoint 20 and the dimmer is on datapoint 22.

GPIO Pinout

Pin Function
GPIO1 UART Tx
GPIO3 UART Rx

Basic Configuration

esphome:
  name: dimmable_light
  platform: ESP8266
  board: esp8285
  
ota:
  safe_mode: True
  password: OTA_PASSWORD
  
api:
  password: 'PASSWORD'
  
wifi:
  ssid: WIFI_SSID
  password: 'WIFI_PASSWORD'
#  use_address: X.X.X.X
  
mqtt:
  broker: X.X.X.X
  username: device_pub
  password: 'MQTT_PASSWORD'
  
uart:
  tx_pin: GPIO1
  rx_pin: GPIO3
  baud_rate: 9600
  
logger:
  baud_rate: 0
  
tuya:

light:
  - platform: "tuya"
    name: "dimmer"
    switch_datapoint: 20
    dimmer_datapoint: 22
    min_value: 1
    max_value: 1024