ESPHome-Devices

Teckin SP10

Teckin SP10

Amazon Link

GPIO Pinout

PinFunction
GPIO0Status LED
GPIO2Blue LED
GPIO13Push Button (HIGH = off, LOW = on)
GPIO15Relay

Basic Configuration

# Basic Config
---
esphome:
name: SP10
platform: ESP8266
board: esp01_1m
esp8266_restore_from_flash: true
wifi:
ssid: !secret wifissid
password: !secret wifipass
ap:
ssid: SP10_AP
password: !secret wifipass
channel: 1
logger:
api:
ota:
web_server:
port: 80
# https://esphomelib.com/esphomeyaml/components/web_server.html
time:
- platform: homeassistant
# https://esphome.io/components/time
id: homeassistant_time
status_led:
# https://esphome.io/components/status_led
pin:
number: GPIO0
inverted: True
output:
# https://esphome.io/components/output/esp8266_pwm.html
- platform: esp8266_pwm
id: blue_led_output
pin:
number: GPIO2
inverted: True
light:
# https://esphome.io/components/light/monochromatic.html
- platform: monochromatic
name: SP10 Blue LED
output: blue_led_output
id: blue_led
default_transition_length: 1ms # default 1s
internal: True
sensor:
- platform: uptime
name: SP10 Uptime
- platform: wifi_signal
name: SP10 Wifi Signal
update_interval: 60s
text_sensor:
- platform: version
name: SP10 ESPhome Version
- platform: wifi_info
ip_address:
name: SP10 IP
binary_sensor:
- platform: gpio
# https://esphome.io/components/binary_sensor/gpio.html
pin:
number: GPIO13
id: button
name: SP10 Button
on_press:
- switch.toggle: relay_template
internal: True
switch:
- platform: gpio
# https://esphome.io/components/switch/gpio
pin: GPIO15
id: relay
# tie the led & relay operation together and report status based on relay state
- platform: template
# https://esphome.io/components/switch/template.html
name: SP10
id: relay_template
lambda: |-
if (id(relay).state) {
return true;
} else {
return false;
}
turn_on_action:
- light.turn_on: blue_led
- switch.turn_on: relay
turn_off_action:
- light.turn_off: blue_led
- switch.turn_off: relay
Edit this page on GitHub