ESPHome-Devices

Nous A1t

Nous A1t

Device Type: plug
Electrical Standard: eu

Nous A1T

GPIO Pinout

see pinout

PinFunction
GPIO00Button1
GPIO01None
GPIO02None
GPIO03None
GPIO04BL0937 CF
GPIO05HLWBL CF1
GPIO09None
GPIO10None
GPIO12HLWBL SELi
GPIO13Led1i
GPIO14Relay1
GPIO15None
GPIO16None
FLAGNone

Basic Configuration

substitutions:
devicename: "smartplug"
# Higher value gives lower watt readout
current_res: "0.00280"
# Lower value gives lower voltage readout
voltage_div: "775"
esphome:
name: $devicename
comment: "Nous Smart Wifi Socket A1T (Tasmota)"
name_add_mac_suffix: true
project:
name: "NOUS.Smart-Wifi-Socket"
version: "A1T"
esp8266:
board: esp8285
# Enable logging
logger:
# Enable Home Assistant API
api:
ota:
wifi:
ssid: !secret wifi_ssid
password: !secret wifi_password
fast_connect: on
# Enable fallback hotspot (captive portal) in case wifi connection fails
ap:
ssid: "${devicename}-AP"
captive_portal:
# see: https://esphome.io/components/time.html
time:
- platform: homeassistant
id: homeassistant_time
# Enable Web server
web_server:
port: 80
status_led:
pin:
number: GPIO13
inverted: True
binary_sensor:
- platform: status
name: "${devicename} - Status"
# toggle relay on/off
- platform: gpio
pin:
number: GPIO00
mode: INPUT_PULLUP
id: "button_state"
on_press:
- switch.toggle: "button_switch"
switch:
- platform: template
name: "${devicename} - Switch"
icon: mdi:power
optimistic: true
id: "button_switch"
lambda: |-
if (id(relay).state) {
return true;
} else {
return false;
}
turn_on_action:
- switch.turn_on: relay
turn_off_action:
- switch.turn_off: relay
- platform: gpio
pin: GPIO14
id: relay
sensor:
- platform: wifi_signal
name: "${devicename} - Wifi Signal"
update_interval: 60s
icon: mdi:wifi
- platform: uptime
name: "${devicename} - Uptime"
update_interval: 60s
icon: mdi:clock-outline
- platform: total_daily_energy
name: "${devicename} - Electric Consumption [kWh]"
power_id: "nous_a1t_watt"
filters:
# Multiplication factor from W to kW is 0.001
- multiply: 0.001
unit_of_measurement: kWh
icon: mdi:calendar-clock
- platform: adc
pin: VCC
name: "${devicename} - VCC Volt"
icon: mdi:flash-outline
- platform: hlw8012
sel_pin:
number: GPIO12
inverted: True
cf_pin: GPIO04
cf1_pin: GPIO05
change_mode_every: 4
current_resistor: ${current_res}
voltage_divider: ${voltage_div}
update_interval: 3s
current:
name: "${devicename} - Ampere"
unit_of_measurement: A
accuracy_decimals: 3
icon: mdi:current-ac
voltage:
name: "${devicename} - Voltage"
unit_of_measurement: V
accuracy_decimals: 1
icon: mdi:flash-outline
power:
name: "${devicename} - Power"
id: "nous_a1t_watt"
unit_of_measurement: W
icon: mdi:gauge
text_sensor:
- platform: wifi_info
ip_address:
name: "${devicename} - IP Address"
ssid:
name: "${devicename} - Wi-Fi SSID"
bssid:
name: "${devicename} - Wi-Fi BSSID"
- platform: version
name: "${devicename} - ESPHome Version"
hide_timestamp: true
Edit this page on GitHub