ESPHome-Devices

MXQ SP06 Smart Plug with Night Light

MXQ SP06 Smart Plug with Night Light

Description

MXQ SP06 Smart Plug with Night Light is a small 10A 110-240V plug with built-in night light. It is based on Tuya hardware, and the initial firmware can be flashed using the "tuya-convert" technique.

GPIO Pinout

PinFunction
GPIO5Push Button (HIGH = off, LOW = on)
GPIO14Relay
GPIO4Blue LED (HIGH = off, LOW = on)
GPIO13Red LED (HIGH = off, LOW = on)
GPIO12Night light LEDs (PWM)

Basic Configuration

# Basic Config
substitutions:
display_name: "Hallway"
esphome:
name: mxq_night_light_01
platform: ESP8266
board: esp01_1m
wifi:
ssid: !secret wifi_ssid
password: !secret wifi_password
captive_portal:
logger:
api:
ota:
# Device Specific Config
light:
- platform: monochromatic
id: night_light
name: "${display_name} Night Light"
output: pwm_output
- platform: binary
id: blue_led
name: "${display_name} Blue LED"
output: blue_led_output
internal: True
output:
- platform: esp8266_pwm
id: pwm_output
pin: GPIO12
frequency: 1000 Hz
- platform: esp8266_pwm
id: blue_led_output
pin:
number: GPIO4
inverted: True
binary_sensor:
- platform: gpio
id: button
pin:
number: GPIO5
mode: INPUT_PULLUP
inverted: True
on_multi_click:
# Single Press
- timing:
- ON for at most 1s
- OFF for at least 0.5s
then:
- switch.toggle: fake_button
# Long Press
- timing:
- ON for at least 2s
then:
- light.toggle: night_light
internal: True
switch:
- platform: gpio
id: relay
pin: GPIO14
- platform: template
id: fake_button
name: "${display_name} Switch"
optimistic: True
turn_on_action:
- switch.turn_on: relay
- light.turn_on: blue_led
turn_off_action:
- switch.turn_off: relay
- light.turn_off: blue_led
status_led:
id: red_status_led
pin:
number: GPIO13
inverted: True
Edit this page on GitHub