ESPHome-Devices

Generic MiFlora BLE Scanner

Generic MiFlora BLE Scanner

GPIO Pinout

PinFunction
N/AN/A

Basic Configuration

# Basic Config
# https://www.espressif.com/en/products/hardware/esp32/overview
esphome:
name: esp32_2
platform: ESP32
board: esp32dev
wifi:
ssid: "ssid"
password: "wifi_password"
logger:
#level: INFO
api:
password: "api_password"
ota:
password: "ota_password"
esp32_ble_tracker:
scan_interval: 360s
sensor:
- platform: xiaomi_miflora
mac_address: "80:EA:CA:88:B3:6C"
temperature:
name: "Peace Lily Temperature"
moisture:
name: "Peace Lily Moisture"
illuminance:
name: "Peace Lily Illuminance"
conductivity:
name: "Peace Lily Soil Conductivity"
battery_level:
name: "Peace Lily Battery Level"
- platform: xiaomi_miflora
mac_address: "C4:7C:8D:6B:01:97"
temperature:
name: "Palour Palm Temperature"
moisture:
name: "Palour Palm Moisture"
illuminance:
name: "Palour Palm Illuminance"
conductivity:
name: "Palour Palm Soil Conductivity"
- platform: xiaomi_miflora
mac_address: "80:EA:CA:88:B3:B1"
temperature:
name: "Lounge Orchid Temperature"
moisture:
name: "Lounge Orchid Moisture"
illuminance:
name: "Lounge Orchid Illuminance"
conductivity:
name: "Lounge Orchid Soil Conductivity"
- platform: xiaomi_miflora
mac_address: "80:EA:CA:88:B0:EF"
temperature:
name: "Tomato Plant Temperature"
moisture:
name: "Tomato Plant Moisture"
illuminance:
name: "Tomato Plant Illuminance"
conductivity:
name: "Tomato Plant Soil Conductivity"
Edit this page on GitHub