ESPHome-Devices

Gosund WP6

Gosund WP6

Amazon Link

GPIO Pinout

PinFunction
GPIO03Push Button inverted
GPIO13Red LED (Status LED)
GPIO01Blue LED
GPIO14Relay 1

Basic Configuration

substitutions:
device_name: gosund_wp6
friendly_name: Gosund WP6
esphome:
name: "${device_name}"
platform: ESP8266
board: esp01_1m
wifi:
ssid: !secret wifi_ssid
password: !secret wifi_password
# Enable fallback hotspot (captive portal) in case wifi connection fails
ap:
ssid: "${device_name} Fallback Hotspot"
password: !secret wifi_fallback_pw
# Enable logging
logger:
# Enable Home Assistant API
api:
ota:
password: !secret gosund_1_ota
binary_sensor:
- platform: gpio
pin:
number: GPIO03
mode: INPUT_PULLUP
inverted: True
name: "${friendly_name} Button"
id: "${device_name}_button"
on_press:
- switch.toggle: "${device_name}_relay"
- platform: status
name: "${friendly_name} Status"
id: "${device_name}_status"
switch:
- platform: gpio
name: "${friendly_name} Relay"
id: "${device_name}_relay"
pin: GPIO14
on_turn_on:
- output.turn_on: led
on_turn_off:
- output.turn_off: led
status_led:
pin:
number: GPIO13
output:
- platform: gpio
pin: GPIO01
inverted: true
id: led
sensor:
- platform: wifi_signal
name: "${friendly_name} WiFi signal"
id: "${device_name}_wifi_signal"
update_interval: 60s
- platform: uptime
name: "${friendly_name} Uptime"
id: "${device_name}_uptime"
update_interval: 60s
text_sensor:
- platform: version
name: "${friendly_name} ESPHome Version"
id: "${device_name}_esphome_version"
Edit this page on GitHub