ESPHome-Devices

Arlec PC288HA Twin Plug

Arlec PC288HA Twin Plug

GPIO Pinout

PinFunction
GPIO1Button (Inverted: true)
GPIO03Relay 2
GPIO13Blue LED (Inverted: true)
GPIO14Relay 1

Basic Configuration

# Basic Config
substitutions:
device_name: "arlec_PC288HA_1"
name: "ARLEC PC288HA 1"
esphome:
name: ${device_name}
comment: ${name}
platform: ESP8266
board: esp01_1m
wifi:
ssid: "ssid"
password: "password"
logger:
api:
password: "api_password"
ota:
password: "ota_password"
sensor:
- platform: uptime
name: ${name} Uptime
- platform: wifi_signal
name: ${name} Signal
update_interval: 300s
binary_sensor:
- platform: gpio
pin:
number: GPIO1
inverted: True
name: ${name} button
on_multi_click:
# Support a single or double click to switch on each relay
- timing:
- ON for at most 1s
- OFF for at least 0.5s
then:
- switch.toggle: relay_a
- timing:
- ON for at most 1s
- OFF for at most 1s
- ON for at most 1s
- OFF for at least 0.2s
then:
- switch.toggle: relay_b
switch:
- platform: gpio
pin: GPIO14
name: "${name} - A"
id: relay_a
restore_mode: always off
icon: mdi:power-socket-au
on_turn_on:
- light.dim_relative:
id: led
relative_brightness: 50%
on_turn_off:
- light.dim_relative:
id: led
relative_brightness: -50%
- platform: gpio
pin: GPIO03
name: "${name} - B"
id: relay_b
restore_mode: always off
icon: mdi:power-socket-au
on_turn_on:
- light.dim_relative:
id: led
relative_brightness: 50%
on_turn_off:
- light.dim_relative:
id: led
relative_brightness: -50%
# Use PWM controlled LED to indicate state
light:
- platform: monochromatic
name: "${name} - LED"
id: led
internal: True
output: gpio13
restore_mode: always off
output:
- platform: esp8266_pwm
id: gpio13
pin:
number: GPIO13
inverted: True
Edit this page on GitHub