devices.esphome.io

SZMDLX IR Hub

SZMDLX IR Hub

Device Type: misc
Electrical Standard: global
Board: esp8266

GPIO Pinout

PinFunction
GPIO04Green Status LEDs
GPIO05IR Receiver
GPIO13Push Button
GPIO14IR Transmitter

Basic Configuration

# This config is for the unit sold by Amazon (US): https://amzn.to/3w5z6ec
# It can also be found on AliExpress: https://www.aliexpress.com/i/4000145673070.html
# The AliExpress model appears to have a nightlight function, but the GPIOs for that are currently unknown.
# The Amazon model does not mention nightlight anywhere, but the LEDs are present on the board.
# Please update if you figure out the nightlight function.
# Basic Config
esphome:
name: SZMDLX IR Hub
platform: ESP8266
board: esp8285
wifi:
ssid: !secret wifi_ssid
password: !secret wifi_password
# Enable fallback hotspot (captive portal) in case wifi connection fails
ap:
ssid: "IR Fallback AP"
password: <password>
captive_portal:
logger:
api:
encryption:
key: !secret api_encryption_key
ota:
password: !secret ota_password
status_led:
pin: GPIO4
sensor:
- platform: uptime
name: "IR Uptime"
- platform: wifi_signal
name: "IR WiFi signal"
update_interval: 60s
binary_sensor:
- platform: status
name: "IR Status"
- platform: gpio
pin: GPIO13
id: physical_button
text_sensor:
- platform: version
name: "IR ESPHome version"
remote_transmitter:
pin:
number: GPIO14
carrier_duty_percent: 50%
remote_receiver:
pin: GPIO5
dump: all
switch:
- platform: template
name: Turn on TV
turn_on_action:
- remote_transmitter.transmit_sony:
data: 0x00000750
repeat:
times: 5
wait_time: 45ms
id: tv_on

alt text alt text

Edit this page on GitHub