devices.esphome.io

Nexx NXG-100

Nexx NXG-100

Device Type: relay
Electrical Standard: us
Board: esp8266

Product

alt text

https://getnexx.com/pages/support

Case has a close fit, but a knife edge near the corner can be used to open the case. Standard serial header pattern present on the board as shown:

alt text

GPIO Pinout

PinFunction
GPIO00Reset BUTTON
GPIO01TX
GPIO03RX
GPIO04Red status LED
GPIO12Door Relay
GPIO13Green status LED
GPIO14Door Closed Sensor

Basic Config

Pressing the reset button .5-2 seconds will pulse the door relay. On each transition of the door sensor, the green LED will blink.

esphome:
name: nxg100
platform: ESP8266
board: esp01_1m
ota:
wifi:
ssid: <SSID>
password: <Password>
# Enable fallback hotspot (captive portal) in case wifi connection fails
ap:
ssid: "Nxg100 Fallback Hotspot"
password: <FB Password>
captive_portal:
# Enable logging
logger:
# Enable Home Assistant API
api:
web_server:
status_led:
pin:
number: GPIO4
inverted: false
binary_sensor:
- platform: gpio
pin:
number: GPIO0
mode: INPUT_PULLUP
inverted: True
internal: true
name: "Reset Button"
on_click:
min_length: 500ms
max_length: 2000ms
then:
- switch.turn_on: greenLED
- if:
condition:
switch.is_on: relay
then:
# just in case someone manually changed it
- switch.turn_off: relay
- delay: 0.5s
# Turn the OPEN switch on briefly
- switch.turn_on: relay
- delay: 0.2s
- switch.turn_off: relay
- switch.turn_off: greenLED
- platform: gpio
pin:
number: GPIO14
mode: INPUT_PULLUP
inverted: True
name: "Door Closed"
id: "doorclosed"
on_press:
- switch.turn_on: greenLED
- delay: 0.1s
- switch.turn_off: greenLED
on_release:
- switch.turn_on: greenLED
- delay: 0.1s
- switch.turn_off: greenLED
- platform: status
name: "Status"
internal: true
sensor:
- platform: wifi_signal
name: "WiFi Signal"
update_interval: 60s
switch:
- platform: gpio
name: "Door Relay"
pin: GPIO12
id: "relay"
internal: true
- platform: gpio
name: "Green LED"
pin: GPIO13
id: "greenLED"
inverted: true
internal: true
- platform: restart
name: "Restart"
cover:
- platform: template
name: "Garage Door"
open_action:
- switch.turn_on: greenLED
# Turn the OPEN switch on briefly
- switch.turn_on: relay
- delay: 0.2s
- switch.turn_off: relay
- switch.turn_off: greenLED
close_action:
- switch.turn_on: greenLED
# Turn the OPEN switch on briefly
- switch.turn_on: relay
- delay: 0.2s
- switch.turn_off: relay
- switch.turn_off: greenLED
optimistic: true
assumed_state: true

Delux Config

This adds sensor checking, so that the closed button does nothing when the door is already closed. Similarly if the door is open, the open button does nothing.

esphome:
name: nxg100
platform: ESP8266
board: esp01_1m
ota:
wifi:
ssid: <SSID>
password: <Password>
# Enable fallback hotspot (captive portal) in case wifi connection fails
ap:
ssid: "Nxg100 Fallback Hotspot"
password: <FB Password>
captive_portal:
# Enable logging
logger:
# Enable Home Assistant API
api:
web_server:
status_led:
pin:
number: GPIO4
inverted: false
binary_sensor:
- platform: gpio
pin:
number: GPIO0
mode: INPUT_PULLUP
inverted: True
internal: true
name: "Reset Button"
on_click:
min_length: 500ms
max_length: 2000ms
then:
- switch.turn_on: greenLED
- if:
condition:
switch.is_on: relay
then:
# just in case someone manually changed it
- switch.turn_off: relay
- delay: 0.5s
# Turn the OPEN switch on briefly
- switch.turn_on: relay
- delay: 0.2s
- switch.turn_off: relay
- switch.turn_off: greenLED
- platform: gpio
pin:
number: GPIO14
mode: INPUT_PULLUP
inverted: True
name: "Door Closed"
id: "doorclosed"
on_press:
- switch.turn_on: greenLED
- delay: 0.1s
- switch.turn_off: greenLED
on_release:
- switch.turn_on: greenLED
- delay: 0.1s
- switch.turn_off: greenLED
- platform: status
name: "Status"
internal: true
sensor:
- platform: wifi_signal
name: "WiFi Signal"
update_interval: 60s
switch:
- platform: gpio
name: "Door Relay"
pin: GPIO12
id: "relay"
internal: true
- platform: gpio
name: "Green LED"
pin: GPIO13
id: "greenLED"
inverted: true
internal: true
- platform: restart
name: "Restart"
cover:
- platform: template
name: "Garage Door"
open_action:
- if:
condition:
binary_sensor.is_off: doorclosed
then:
- logger.log: "Door is already open"
else:
- switch.turn_on: greenLED
- if:
condition:
switch.is_on: relay
then:
# just in case someone manually changed it
- switch.turn_off: relay
- delay: 0.5s
# Turn the OPEN switch on briefly
- switch.turn_on: relay
- delay: 0.2s
- switch.turn_off: relay
- switch.turn_off: greenLED
close_action:
- if:
condition:
binary_sensor.is_on: doorclosed
then:
- logger.log: "Door is already closed"
else:
- switch.turn_on: greenLED
- if:
condition:
switch.is_on: relay
then:
# just in case someone manually changed it
- switch.turn_off: relay
- delay: 0.5s
# Turn the OPEN switch on briefly
- switch.turn_on: relay
- delay: 0.2s
- switch.turn_off: relay
- switch.turn_off: greenLED
optimistic: true
assumed_state: true
Edit this page on GitHub