devices.esphome.io

Gosund P2 Power Strip

Gosund P2 Power Strip

Device Type: plug
Electrical Standard: us
Board: esp8266

Product Image

Gosund P2 Wall Outlet

Smart Outlet, Gosund Wall Outlet Extender (15A/1800W), Multi WiFi Plug with 3 USB Ports (5V/3A 24W) and 6 Outlet Wall Adapter Plug Expanders Surge Protector Works with Alexa and Google Home

Newer version

NOTE: There are newer versions of this circulating that have an ESP8265 chip in them. If you use the esp01_1m config for these, they will go into a reboot loop. You must use board: esp8285 for these devices. Possible distinguishing marks are FCC ID: 2APUZ-P2 or a date of 04/2021 printed on the back.

These newer versions also have the USB power control and LEDs opposite of the previous version

GPIO Pinout

PinFunction
GPIO02ledlink
GPIO05Relay4i - USB
GPIO12Relay1
GPIO13Relay2
GPIO14Relay3
GPIO16Button1

Basic Configuration

For versions produced before 04/2021:

substitutions:
name: plug_strip
upper_name: Plug Strip
platform: ESP8266
board: esp01_1m
esphome:
name: $name
platform: $platform
board: $board
<<: !include ../secrets.yaml
binary_sensor:
- platform: gpio
pin:
number: GPIO16
mode: INPUT_PULLUP
inverted: yes
name: "${upper_name} Power Button"
id: "${name}_power_button"
on_press:
then:
- switch.toggle: "${name}_usb"
- switch.toggle: "${name}_switch1"
- switch.toggle: "${name}_switch2"
- switch.toggle: "${name}_switch3"
switch:
- platform: gpio
name: "Wall ${upper_name} Switch1"
id: "${name}_switch1"
pin: GPIO12
inverted: no
restore_mode: "RESTORE_DEFAULT_ON"
- platform: gpio
name: "Wall ${upper_name} Switch2"
id: "${name}_switch2"
pin: GPIO13
inverted: no
restore_mode: "RESTORE_DEFAULT_ON"
- platform: gpio
name: "Wall ${upper_name} Switch3"
id: "${name}_switch3"
pin: GPIO14
inverted: no
restore_mode: "RESTORE_DEFAULT_ON"
- platform: gpio
name: "Wall ${upper_name} usb"
id: "${name}_usb"
pin: GPIO05
inverted: no
on_turn_on:
- switch.turn_on: ledwhite
- switch.turn_on: ledblue
on_turn_off:
- switch.turn_off: ledwhite
- switch.turn_off: ledblue
- platform: gpio
id: ledwhite
pin: GPIO0
inverted: no
- platform: gpio
id: ledblue
pin: GPIO2
inverted: no

For versions produced after 04/2021:

substitutions:
name: plug_strip
upper_name: Plug Strip
platform: ESP8266
board: esp8285
esphome:
name: $name
platform: $platform
board: $board
<<: !include ../secrets.yaml
binary_sensor:
- platform: gpio
pin:
number: GPIO16
mode: INPUT_PULLUP
inverted: yes
name: "${upper_name} Power Button"
id: "${name}_power_button"
on_press:
then:
- switch.toggle: "${name}_usb"
- switch.toggle: "${name}_switch1"
- switch.toggle: "${name}_switch2"
- switch.toggle: "${name}_switch3"
switch:
- platform: gpio
name: "Wall ${upper_name} Switch1"
id: "${name}_switch1"
pin: GPIO12
inverted: no
restore_mode: "RESTORE_DEFAULT_ON"
- platform: gpio
name: "Wall ${upper_name} Switch2"
id: "${name}_switch2"
pin: GPIO13
inverted: no
restore_mode: "RESTORE_DEFAULT_ON"
- platform: gpio
name: "Wall ${upper_name} Switch3"
id: "${name}_switch3"
pin: GPIO14
inverted: no
restore_mode: "RESTORE_DEFAULT_ON"
- platform: gpio
name: "Wall ${upper_name} usb"
id: "${name}_usb"
pin: GPIO05
inverted: yes
on_turn_on:
- switch.turn_on: ledwhite
- switch.turn_on: ledblue
on_turn_off:
- switch.turn_off: ledwhite
- switch.turn_off: ledblue
- platform: gpio
id: ledwhite
pin: GPIO0
inverted: yes
- platform: gpio
id: ledblue
pin: GPIO2
inverted: yes
Edit this page on GitHub