devices.esphome.io

Feit BPA800/RGBW/AG/2

Feit BPA800/RGBW/AG/2

Device Type: light
Electrical Standard: us
Board: esp8266

Another Costco Variant. Do not confuse with Feit BPA800/RGBW/AG/2(P) as they use different GPIO pin numbers.

Be warned that you will have to disassemble the device to flash the firmware if it is newer than about March 2020. Tuya changed their firmware such that tuya-convert no longer works as before.

substitutions:
comment: "...any comment, like the device hostname..."
devicename: my_device
platform: ESP8266
board: esp01_1m
esphome:
name: $devicename
platform: $platform
board: $board
comment: "${comment}"
wifi:
ssid: !secret wifi_ssid
password: !secret wifi_pass
# Define SSID for hotspot (captive portal) in case wifi connection fails
ap:
ssid: AP_${devicename}
#enable captive portal for hotspot
captive_portal:
ota:
password: !secret ota_pass
api:
encryption:
key: !secret encryption_key
sm16716:
data_pin: GPIO14
clock_pin: GPIO4
num_channels: 3
num_chips: 1
output:
- platform: sm16716
id: output_red
channel: 0
power_supply: rgb_power
- platform: sm16716
id: output_green
channel: 1
power_supply: rgb_power
- platform: sm16716
id: output_blue
channel: 2
power_supply: rgb_power
- platform: esp8266_pwm
id: output_warm_white
pin: GPIO12
- platform: esp8266_pwm
id: output_cold_white
pin: GPIO05
light:
- platform: rgbww
name: "${devicename}"
color_interlock: true
restore_mode: RESTORE_DEFAULT_OFF
red: output_red
green: output_green
blue: output_blue
cold_white: output_cold_white
warm_white: output_warm_white
cold_white_color_temperature: 6500 K
warm_white_color_temperature: 2700 K
gamma_correct: 0.0
power_supply:
- id: rgb_power
pin: GPIO13
Edit this page on GitHub