devices.esphome.io

CircuitSetup Expandable-6 Channel ESP32 Energy Meter (ATM90E32)

CircuitSetup Expandable-6 Channel ESP32 Energy Meter (ATM90E32)

Device Type: misc
Electrical Standard: global
Board: esp32

GPIO Pinout

PinFunction
GPIO5Main Board CS 1 - CT1-3
GPIO4Main Board CS 2 - CT4-6
GPIO0Add-on Board 1 CS 1 - CT1-3
GPIO16Add-on Board 1 CS 2 - CT4-6
GPIO27Add-on Board 2 CS 1 - CT1-3
GPIO17Add-on Board 2 CS 2 - CT4-6
GPIO2Add-on Board 3 CS 1 - CT1-3 (do not use if ESP32 has on-board LED)
GPIO21Add-on Board 3 CS 2 - CT4-6
GPIO13Add-on Board 4 CS 1 - CT1-3
GPIO22Add-on Board 4 CS 2 - CT4-6
GPIO14Add-on Board 5 CS 1 - CT1-3
GPIO25Add-on Board 5 CS 2 - CT4-6
GPIO15Add-on Board 6 CS 1 - CT1-3
GPIO26Add-on Board 6 CS 2 - CT4-6
GPIO18CLK Pin
GPIO19MISO Pin
GPIO23MOSI Pin

Main Board Only Configuration

substitutions:
# Change the disp_name to something you want
disp_name: 6C
# Interval of how often the power is updated
update_time: 10s
# Current Transformers:
# 20A/25mA SCT-006: 11143
# 30A/1V SCT-013-030: 8650
# 50A/1V SCT-013-050: 15420
# 80A/26.6mA SCT-010: 41660
# 100A/50ma SCT-013-000: 27518
# 120A/40mA: SCT-016: 41787
# 200A/100mA SCT-024: 27518
current_cal: '27518'
# Jameco 9VAC Transformer:
# For meter versions:
# >= v1.3: 7305
voltage_cal: '7305'
esphome:
name: 6chan_energy_meter
platform: ESP32
board: nodemcu-32s
wifi:
ssid: !secret wifi_ssid
password: !secret wifi_pass
manual_ip:
static_ip: !secret ip_eh_nrgnode
gateway: !secret ip_gateway
subnet: !secret ip_subnet
dns1: !secret ip_dns1
# mqtt:
# broker: !secret mqtt_broker
# username: !secret mqtt_user
# password: !secret mqtt_pass
# Enable logging
logger:
# Enable Home Assistant API
api:
ota:
web_server:
port: 80
spi:
clk_pin: 18
miso_pin: 19
mosi_pin: 23
sensor:
- platform: wifi_signal
name: ${disp_name} WiFi
update_interval: 60s
#IC1
- platform: atm90e32
cs_pin: 5
phase_a:
voltage:
name: ${disp_name} Volts A
id: ic1Volts
accuracy_decimals: 1
current:
name: ${disp_name} CT1 Amps
id: ct1Amps
# The max value for current that the meter can output is 65.535. If you expect to measure current over 65A,
# divide the gain_ct by 2 (120A CT) or 4 (200A CT) and multiply the current and power values by 2 or 4 by uncommenting the filter below
# filters:
# - multiply: 2
power:
name: ${disp_name} CT1 Watts
id: ct1Watts
# filters:
# - multiply: 2
gain_voltage: ${voltage_cal}
gain_ct: ${current_cal}
phase_b:
current:
name: ${disp_name} CT2 Amps
id: ct2Amps
power:
name: ${disp_name} CT2 Watts
id: ct2Watts
gain_voltage: ${voltage_cal}
gain_ct: ${current_cal}
phase_c:
current:
name: ${disp_name} CT3 Amps
id: ct3Amps
power:
name: ${disp_name} CT3 Watts
id: ct3Watts
gain_voltage: ${voltage_cal}
gain_ct: ${current_cal}
frequency:
name: ${disp_name} Freq A
line_frequency: 60Hz
gain_pga: 1X
update_interval: ${update_time}
#IC2
- platform: atm90e32
cs_pin: 4
phase_a:
#this voltage is only needed if monitoring 2 voltages
# voltage:
# name: ${disp_name} Volts B
# id: ic2Volts
# accuracy_decimals: 1
current:
name: ${disp_name} CT4 Amps
id: ct4Amps
power:
name: ${disp_name} CT4 Watts
id: ct4Watts
gain_voltage: ${voltage_cal}
gain_ct: ${current_cal}
phase_b:
current:
name: ${disp_name} CT5 Amps
id: ct5Amps
power:
name: ${disp_name} CT5 Watts
id: ct5Watts
gain_voltage: ${voltage_cal}
gain_ct: ${current_cal}
phase_c:
current:
name: ${disp_name} CT6 Amps
id: ct6Amps
power:
name: ${disp_name} CT6 Watts
id: ct6Watts
gain_voltage: ${voltage_cal}
gain_ct: ${current_cal}
frequency:
name: ${disp_name} Freq B
line_frequency: 60Hz
gain_pga: 1X
update_interval: ${update_time}
#Total Amps
- platform: template
name: ${disp_name} Total Amps
id: totalAmps
lambda: return id(ct1Amps).state + id(ct2Amps).state + id(ct3Amps).state + id(ct4Amps).state + id(ct5Amps).state + id(ct6Amps).state ;
accuracy_decimals: 2
unit_of_measurement: A
icon: "mdi:flash"
update_interval: ${update_time}
#Total Watts
- platform: template
name: ${disp_name} Total Watts
id: totalWatts
lambda: return id(ct1Watts).state + id(ct2Watts).state + id(ct3Watts).state + id(ct4Watts).state + id(ct5Watts).state + id(ct6Watts).state ;
accuracy_decimals: 1
unit_of_measurement: W
icon: "mdi:flash-circle"
update_interval: ${update_time}
#kWh
- platform: total_daily_energy
name: ${disp_name} Total kWh
power_id: totalWatts
filters:
- multiply: 0.001
unit_of_measurement: kWh
switch:
- platform: restart
name: ${disp_name} Restart
time:
- platform: sntp
id: sntp_time

Main Board + 1 Add-on Board Configuration

substitutions:
# Change the disp_name to something you want
disp_name: 6C
# Interval of how often the power is updated
update_time: 10s
# Current Transformers:
# 20A/25mA SCT-006: 11143
# 30A/1V SCT-013-030: 8650
# 50A/1V SCT-013-050: 15420
# 80A/26.6mA SCT-010: 41660
# 100A/50ma SCT-013-000: 27518
# 120A/40mA: SCT-016: 41787
# 200A/100mA SCT-024: 27518
current_cal: "27518"
# Jameco 9VAC Transformer:
# For meter versions:
# >= v1.3: 7305
# <= v1.2: 42620
voltage_cal: "7305"
esphome:
name: 6chan_energy_meter
platform: ESP32
board: nodemcu-32s
wifi:
ssid: !secret wifi_ssid
password: !secret wifi_pass
manual_ip:
static_ip: !secret ip_eh_nrgnode
gateway: !secret ip_gateway
subnet: !secret ip_subnet
dns1: !secret ip_dns1
# mqtt:
# broker: !secret mqtt_broker
# username: !secret mqtt_user
# password: !secret mqtt_pass
# Enable logging
logger:
# Enable Home Assistant API
api:
ota:
web_server:
port: 80
spi:
clk_pin: 18
miso_pin: 19
mosi_pin: 23
sensor:
- platform: wifi_signal
name: ${disp_name} WiFi
update_interval: 60s
#IC1 Main
- platform: atm90e32
cs_pin: 5
phase_a:
voltage:
name: ${disp_name} Volts A
id: ic1Volts
accuracy_decimals: 1
current:
name: ${disp_name} CT1 Amps
id: ct1Amps
# The max value for current that the meter can output is 65.535. If you expect to measure current over 65A,
# divide the gain_ct by 2 (120A CT) or 4 (200A CT) and multiply the current and power values by 2 or 4 by uncommenting the filter below
# filters:
# - multiply: 2
power:
name: ${disp_name} CT1 Watts
id: ct1Watts
# filters:
# - multiply: 2
gain_voltage: ${voltage_cal}
gain_ct: ${current_cal}
phase_b:
current:
name: ${disp_name} CT2 Amps
id: ct2Amps
power:
name: ${disp_name} CT2 Watts
id: ct2Watts
gain_voltage: ${voltage_cal}
gain_ct: ${current_cal}
phase_c:
current:
name: ${disp_name} CT3 Amps
id: ct3Amps
power:
name: ${disp_name} CT3 Watts
id: ct3Watts
gain_voltage: ${voltage_cal}
gain_ct: ${current_cal}
frequency:
name: ${disp_name} Freq A
line_frequency: 60Hz
gain_pga: 1X
update_interval: ${update_time}
#IC2 Main
- platform: atm90e32
cs_pin: 4
phase_a:
current:
name: ${disp_name} CT4 Amps
id: ct4Amps
power:
name: ${disp_name} CT4 Watts
id: ct4Watts
gain_voltage: ${voltage_cal}
gain_ct: ${current_cal}
phase_b:
current:
name: ${disp_name} CT5 Amps
id: ct5Amps
power:
name: ${disp_name} CT5 Watts
id: ct5Watts
gain_voltage: ${voltage_cal}
gain_ct: ${current_cal}
phase_c:
current:
name: ${disp_name} CT6 Amps
id: ct6Amps
power:
name: ${disp_name} CT6 Watts
id: ct6Watts
gain_voltage: ${voltage_cal}
gain_ct: ${current_cal}
line_frequency: 60Hz
gain_pga: 1X
update_interval: ${update_time}
#IC1 AddOn
- platform: atm90e32
cs_pin: 0
phase_a:
current:
name: ${disp_name} CT7 Amps
id: ct7Amps
power:
name: ${disp_name} CT7 Watts
id: ct7Watts
gain_voltage: ${voltage_cal}
gain_ct: ${current_cal}
phase_b:
current:
name: ${disp_name} CT8 Amps
id: ct8Amps
power:
name: ${disp_name} CT8 Watts
id: ct8Watts
gain_voltage: ${voltage_cal}
gain_ct: ${current_cal}
phase_c:
current:
name: ${disp_name} CT9 Amps
id: ct9Amps
power:
name: ${disp_name} CT9 Watts
id: ct9Watts
gain_voltage: ${voltage_cal}
gain_ct: ${current_cal}
line_frequency: 60Hz
gain_pga: 1X
update_interval: ${update_time}
#IC2 AddOn
- platform: atm90e32
cs_pin: 16
phase_a:
current:
name: ${disp_name} CT10 Amps
id: ct10Amps
power:
name: ${disp_name} CT10 Watts
id: ct10Watts
gain_voltage: ${voltage_cal}
gain_ct: ${current_cal}
phase_b:
current:
name: ${disp_name} CT11 Amps
id: ct11Amps
power:
name: ${disp_name} CT11 Watts
id: ct11Watts
gain_voltage: ${voltage_cal}
gain_ct: ${current_cal}
phase_c:
current:
name: ${disp_name} CT12 Amps
id: ct12Amps
power:
name: ${disp_name} CT12 Watts
id: ct12Watts
gain_voltage: ${voltage_cal}
gain_ct: ${current_cal}
line_frequency: 60Hz
gain_pga: 1X
update_interval: ${update_time}
#Total Amps Main
- platform: template
name: ${disp_name} Total Amps Main
id: totalAmpsMain
lambda: return id(ct1Amps).state + id(ct2Amps).state + id(ct3Amps).state + id(ct4Amps).state + id(ct5Amps).state + id(ct6Amps).state ;
accuracy_decimals: 2
unit_of_measurement: A
icon: "mdi:flash"
update_interval: ${update_time}
#Total Amps AddOn
- platform: template
name: ${disp_name} Total Amps Add-on
id: totalAmpsAddOn
lambda: return id(ct7Amps).state + id(ct8Amps).state + id(ct9Amps).state + id(ct10Amps).state + id(ct11Amps).state + id(ct12Amps).state ;
accuracy_decimals: 2
unit_of_measurement: A
icon: "mdi:flash"
update_interval: ${update_time}
#Total Amps
- platform: template
name: ${disp_name} Total Amps
id: totalAmps
lambda: return id(totalAmpsMain).state + id(totalAmpsAddOn).state ;
accuracy_decimals: 2
unit_of_measurement: A
icon: "mdi:flash"
update_interval: ${update_time}
#Total Watts Main
- platform: template
name: ${disp_name} Total Watts Main
id: totalWattsMain
lambda: return id(ct1Watts).state + id(ct2Watts).state + id(ct3Watts).state + id(ct4Watts).state + id(ct5Watts).state + id(ct6Watts).state ;
accuracy_decimals: 1
unit_of_measurement: W
icon: "mdi:flash-circle"
update_interval: ${update_time}
#Total Watts AddOn
- platform: template
name: ${disp_name} Total Watts Add-on
id: totalWattsAddOn
lambda: return id(ct7Watts).state + id(ct8Watts).state + id(ct9Watts).state + id(ct10Watts).state + id(ct11Watts).state + id(ct12Watts).state ;
accuracy_decimals: 1
unit_of_measurement: W
icon: "mdi:flash-circle"
update_interval: ${update_time}
#Total Watts
- platform: template
name: ${disp_name} Total Watts
id: totalWatts
lambda: return id(totalWattsMain).state + id(totalWattsAddOn).state ;
accuracy_decimals: 1
unit_of_measurement: W
icon: "mdi:flash-circle"
update_interval: ${update_time}
#kWh
- platform: total_daily_energy
name: ${disp_name} Total kWh
power_id: totalWatts
filters:
- multiply: 0.001
unit_of_measurement: kWh
switch:
- platform: restart
name: ${disp_name} Restart
time:
- platform: sntp
id: sntp_time

Main Board + 5 Add-on Boards Configuration

# 5 add-on boards - 36 current channels
# ESPHome has a limit on the amount of sensors that it can handle before running out of memory.
# Because of this, only the power sensor for each current channel is output
substitutions:
# Change the disp_name to something you want
disp_name: Energy_Meter
# Interval of how often the power is updated
update_time: 10s
# Current Transformers:
# 20A/25mA SCT-006: 11143
# 30A/1V SCT-013-030: 8650
# 50A/1V SCT-013-050: 15420
# 80A/26.6mA SCT-010: 41660
# 100A/50ma SCT-013-000: 27518
# 120A/40mA: SCT-016: 41787
# 200A/100mA SCT-024: 27518
current_cal: "11143"
# Jameco 9VAC Transformer:
# For meter versions:
# >= v1.3: 7305
# <= v1.2: 42620
voltage_cal: "7305"
esphome:
name: energy_meter
platform: ESP32
board: nodemcu-32s
wifi:
ssid: !secret wifi_ssid
password: !secret wifi_pass
# Enable logging
logger:
# Enable Home Assistant API
api:
ota:
spi:
clk_pin: 18
miso_pin: 19
mosi_pin: 23
sensor:
#IC1 Main
- platform: atm90e32
cs_pin: 5
phase_a:
voltage:
name: ${disp_name} Volts A Main
id: ic1Volts
accuracy_decimals: 1
current:
name: ${disp_name} CT1 Amps
id: ct1Amps
power:
name: ${disp_name} CT1 Watts
id: ct1Watts
gain_voltage: ${voltage_cal}
gain_ct: ${current_cal}
phase_b:
current:
name: ${disp_name} CT2 Amps
id: ct2Amps
power:
name: ${disp_name} CT2 Watts
id: ct2Watts
gain_voltage: ${voltage_cal}
gain_ct: ${current_cal}
phase_c:
current:
name: ${disp_name} CT3 Amps
id: ct3Amps
power:
name: ${disp_name} CT3 Watts
id: ct3Watts
gain_voltage: ${voltage_cal}
gain_ct: ${current_cal}
frequency:
name: ${disp_name} Freq A Main
line_frequency: 60Hz
gain_pga: 1X
update_interval: ${update_time}
#IC2 Main
- platform: atm90e32
cs_pin: 4
phase_a:
current:
name: ${disp_name} CT4 Amps
id: ct4Amps
power:
name: ${disp_name} CT4 Watts
id: ct4Watts
gain_voltage: ${voltage_cal}
gain_ct: ${current_cal}
phase_b:
current:
name: ${disp_name} CT5 Amps
id: ct5Amps
power:
name: ${disp_name} CT5 Watts
id: ct5Watts
gain_voltage: ${voltage_cal}
gain_ct: ${current_cal}
phase_c:
current:
name: ${disp_name} CT6 Amps
id: ct6Amps
power:
name: ${disp_name} CT6 Watts
id: ct6Watts
gain_voltage: ${voltage_cal}
gain_ct: ${current_cal}
line_frequency: 60Hz
gain_pga: 1X
update_interval: ${update_time}
#IC1 AddOn 1
- platform: atm90e32
cs_pin: 0
phase_a:
power:
name: ${disp_name} CT7 Watts
id: ct7Watts
gain_voltage: ${voltage_cal}
gain_ct: ${current_cal}
phase_b:
power:
name: ${disp_name} CT8 Watts
id: ct8Watts
gain_voltage: ${voltage_cal}
gain_ct: ${current_cal}
phase_c:
power:
name: ${disp_name} CT9 Watts
id: ct9Watts
gain_voltage: ${voltage_cal}
gain_ct: ${current_cal}
line_frequency: 60Hz
gain_pga: 1X
update_interval: ${update_time}
#IC2 AddOn 1
- platform: atm90e32
cs_pin: 16
phase_a:
power:
name: ${disp_name} CT10 Watts
id: ct10Watts
gain_voltage: ${voltage_cal}
gain_ct: ${current_cal}
phase_b:
power:
name: ${disp_name} CT11 Watts
id: ct11Watts
gain_voltage: ${voltage_cal}
gain_ct: ${current_cal}
phase_c:
power:
name: ${disp_name} CT12 Watts
id: ct12Watts
gain_voltage: ${voltage_cal}
gain_ct: ${current_cal}
line_frequency: 60Hz
gain_pga: 1X
update_interval: ${update_time}
#IC1 AddOn 2
- platform: atm90e32
cs_pin: 27
phase_a:
power:
name: ${disp_name} CT13 Watts
id: ct13Watts
gain_voltage: ${voltage_cal}
gain_ct: ${current_cal}
phase_b:
power:
name: ${disp_name} CT14 Watts
id: ct14Watts
gain_voltage: ${voltage_cal}
gain_ct: ${current_cal}
phase_c:
power:
name: ${disp_name} CT15 Watts
id: ct15Watts
gain_voltage: ${voltage_cal}
gain_ct: ${current_cal}
line_frequency: 60Hz
gain_pga: 1X
update_interval: ${update_time}
#IC2 AddOn 2
- platform: atm90e32
cs_pin: 17
phase_a:
power:
name: ${disp_name} CT16 Watts
id: ct16Watts
gain_voltage: ${voltage_cal}
gain_ct: ${current_cal}
phase_b:
power:
name: ${disp_name} CT17 Watts
id: ct17Watts
gain_voltage: ${voltage_cal}
gain_ct: ${current_cal}
phase_c:
power:
name: ${disp_name} CT18 Watts
id: ct18Watts
gain_voltage: ${voltage_cal}
gain_ct: ${current_cal}
line_frequency: 60Hz
gain_pga: 1X
update_interval: ${update_time}
#IC1 AddOn 3
- platform: atm90e32
cs_pin: 2
phase_a:
power:
name: ${disp_name} CT19 Watts
id: ct19Watts
gain_voltage: ${voltage_cal}
gain_ct: ${current_cal}
phase_b:
power:
name: ${disp_name} CT20 Watts
id: ct20Watts
gain_voltage: ${voltage_cal}
gain_ct: ${current_cal}
phase_c:
power:
name: ${disp_name} CT21 Watts
id: ct21Watts
gain_voltage: ${voltage_cal}
gain_ct: ${current_cal}
line_frequency: 60Hz
gain_pga: 1X
update_interval: ${update_time}
#IC2 AddOn 3
- platform: atm90e32
cs_pin: 21
phase_a:
power:
name: ${disp_name} CT22 Watts
id: ct22Watts
gain_voltage: ${voltage_cal}
gain_ct: ${current_cal}
phase_b:
power:
name: ${disp_name} CT23 Watts
id: ct23Watts
gain_voltage: ${voltage_cal}
gain_ct: ${current_cal}
phase_c:
power:
name: ${disp_name} CT24 Watts
id: ct24Watts
gain_voltage: ${voltage_cal}
gain_ct: ${current_cal}
line_frequency: 60Hz
gain_pga: 1X
update_interval: ${update_time}
#IC1 AddOn 4
- platform: atm90e32
cs_pin: 13
phase_a:
power:
name: ${disp_name} CT25 Watts
id: ct25Watts
gain_voltage: ${voltage_cal}
gain_ct: ${current_cal}
phase_b:
power:
name: ${disp_name} CT26 Watts
id: ct26Watts
gain_voltage: ${voltage_cal}
gain_ct: ${current_cal}
phase_c:
power:
name: ${disp_name} CT27 Watts
id: ct27Watts
gain_voltage: ${voltage_cal}
gain_ct: ${current_cal}
line_frequency: 60Hz
gain_pga: 1X
update_interval: ${update_time}
#IC2 AddOn 4
- platform: atm90e32
cs_pin: 22
phase_a:
power:
name: ${disp_name} CT28 Watts
id: ct28Watts
gain_voltage: ${voltage_cal}
gain_ct: ${current_cal}
phase_b:
power:
name: ${disp_name} CT29 Watts
id: ct29Watts
gain_voltage: ${voltage_cal}
gain_ct: ${current_cal}
phase_c:
power:
name: ${disp_name} CT30 Watts
id: ct30Watts
gain_voltage: ${voltage_cal}
gain_ct: ${current_cal}
line_frequency: 60Hz
gain_pga: 1X
update_interval: ${update_time}
#IC1 AddOn 5
- platform: atm90e32
cs_pin: 14
phase_a:
power:
name: ${disp_name} CT31 Watts
id: ct31Watts
gain_voltage: ${voltage_cal}
gain_ct: ${current_cal}
phase_b:
power:
name: ${disp_name} CT32 Watts
id: ct32Watts
gain_voltage: ${voltage_cal}
gain_ct: ${current_cal}
phase_c:
power:
name: ${disp_name} CT33 Watts
id: ct33Watts
gain_voltage: ${voltage_cal}
gain_ct: ${current_cal}
line_frequency: 60Hz
gain_pga: 1X
update_interval: ${update_time}
#IC2 AddOn 5
- platform: atm90e32
cs_pin: 25
phase_a:
power:
name: ${disp_name} CT34 Watts
id: ct34Watts
gain_voltage: ${voltage_cal}
gain_ct: ${current_cal}
phase_b:
power:
name: ${disp_name} CT35 Watts
id: ct35Watts
gain_voltage: ${voltage_cal}
gain_ct: ${current_cal}
phase_c:
power:
name: ${disp_name} CT36 Watts
id: ct36Watts
gain_voltage: ${voltage_cal}
gain_ct: ${current_cal}
line_frequency: 60Hz
gain_pga: 1X
update_interval: ${update_time}
#Total Watts Main
- platform: template
name: ${disp_name} Total Watts Main
id: totalWattsMain
lambda: return id(ct1Watts).state + id(ct2Watts).state + id(ct3Watts).state + id(ct4Watts).state + id(ct5Watts).state + id(ct6Watts).state ;
accuracy_decimals: 1
unit_of_measurement: W
icon: "mdi:flash-circle"
update_interval: ${update_time}
#Total Watts AddOn1
- platform: template
name: ${disp_name} Total Watts Add-on1
id: totalWattsAddOn1
lambda: return id(ct7Watts).state + id(ct8Watts).state + id(ct9Watts).state + id(ct10Watts).state + id(ct11Watts).state + id(ct12Watts).state ;
accuracy_decimals: 1
unit_of_measurement: W
icon: "mdi:flash-circle"
update_interval: ${update_time}
#Total Watts AddOn2
- platform: template
name: ${disp_name} Total Watts Add-on2
id: totalWattsAddOn2
lambda: return id(ct13Watts).state + id(ct14Watts).state + id(ct15Watts).state + id(ct16Watts).state + id(ct17Watts).state + id(ct18Watts).state ;
accuracy_decimals: 1
unit_of_measurement: W
icon: "mdi:flash-circle"
update_interval: ${update_time}
#Total Watts AddOn3
- platform: template
name: ${disp_name} Total Watts Add-on3
id: totalWattsAddOn3
lambda: return id(ct19Watts).state + id(ct20Watts).state + id(ct21Watts).state + id(ct22Watts).state + id(ct23Watts).state + id(ct24Watts).state ;
accuracy_decimals: 1
unit_of_measurement: W
icon: "mdi:flash-circle"
update_interval: ${update_time}
#Total Watts AddOn4
- platform: template
name: ${disp_name} Total Watts Add-on4
id: totalWattsAddOn4
lambda: return id(ct25Watts).state + id(ct26Watts).state + id(ct27Watts).state + id(ct28Watts).state + id(ct29Watts).state + id(ct30Watts).state ;
accuracy_decimals: 1
unit_of_measurement: W
icon: "mdi:flash-circle"
update_interval: ${update_time}
#Total Watts AddOn5
- platform: template
name: ${disp_name} Total Watts Add-on5
id: totalWattsAddOn5
lambda: return id(ct31Watts).state + id(ct32Watts).state + id(ct33Watts).state + id(ct34Watts).state + id(ct35Watts).state + id(ct36Watts).state ;
accuracy_decimals: 1
unit_of_measurement: W
icon: "mdi:flash-circle"
update_interval: ${update_time}
#Total Watts
- platform: template
name: ${disp_name} Total Watts
id: totalWatts
lambda: return id(totalWattsMain).state + id(totalWattsAddOn1).state + id(totalWattsAddOn2).state + id(totalWattsAddOn3).state + id(totalWattsAddOn4).state + id(totalWattsAddOn5).state ;
accuracy_decimals: 1
unit_of_measurement: W
icon: "mdi:flash-circle"
update_interval: ${update_time}
#kWh
- platform: total_daily_energy
name: ${disp_name} Total kWh
power_id: totalWatts
filters:
- multiply: 0.001
unit_of_measurement: kWh
time:
- platform: sntp
id: sntp_time
Edit this page on GitHub